The LCD display shows the instantaneous speed of your G-FORCE S10 escooter, battery charge, how far you have ridden, speed level, and much more.

There are 5 buttons on the finger controller of the LCD display: POWER/Upshift/Downshift button, Left-turn Signal button, Right-turn Signal button, Headlight button, and Horn button.

Turn On/Off the LCD display

Locate the 5-in-1 control panel on the left side of the handlebar.
Press and hold the “POWER” button (in the middle) to turn the scooter on / off.

Note that if you short press the “POWER” button, the Daytime Running Lights (DRL) will light up for a sec instead of the LCD display.

Change the Speed Mode

Tap the Middle button to move over from Level 1 to Level 2, and Level 3. Level 3 indicates the fastest speed.

Lighting System

Press the “LIGHT ” button on the top to turn the front light (not the DRL lights) on / off.

Press the left button to turn on/off the left-turn signal. The rear left light will flash to indicate a turn to left.

Press the right button to turn on/off the right-turn signal.

The brake warning lights will only come on when either of the brake levers is engaged.

Note: The brake lights on both sides light up to warn others that you're slowing down. Lights out once you let off the brake levers.

Any question? Please reach the G-FORCE support team at: support@g-forcebike.com