T42 Pedal assist sensor replacement
How to replace the sensor for the G-force T42? To accomplish this, follow the below steps.
Step 1: First, turn off the bike. Unplug the sensor connector, which is near the crankset.
Note: Hold and pull the connector halves apart directly, do not twist or turn them.
Step 2: Unscrew the screw on the crankset with the impact wrench.
Step 3: Slightly tilt the bike towards the left, press the chain with your thumb, crank the pedal to remove the chain from the sprocket.
Step 4: Knock the crank arm with a hammer to remove the crankset.
Step 5: Swap out the pedal assist sensor.
Step 6: Put the crankset back on and tighten the screw.
Step 7: Firmly plug in the sensor connector.
Need additional help? Please reach the G-force support team at: email@example.com
Can't find what you're looking for?
Our customer support experts are waiting to answer your questions.
Submit a question